🥇🎨Best Paint for a Spray Gun🏆

Disclaimer: There are affiliate links in this post. At no cost to you, I get commissions for purchases made through links in this post.

Top 10 Best Paint for a Spray Gun

It might be that you work for a construction or industrial painting company and need to find the best type of spray paint for metal for your next job. It might be that you aren’t a professional, but a DIY enthusiast and so you are searching for the best trim paint brand to help you spruce up your interiors a bit. It might be that you own a business and have decided that it could do with a good remodeling job, and so you need to find the best plastic paint for walls. There are any number of different reasons why you might be looking to paint your interior or exterior décor.

Whatever your particular reason may be, however, the fact remains that you’re going to want to make sure that you’re using the best paint for the job.

Of course, what “the best paint for the job” is will vary from task to task and according to the kind of material you’re painting. A metal wall is going to require a different approach to painting than brick, stucco, or wooden walls, and all of these surfaces will require different types of paint.

One common denominator among those jobs and surfaces is that spray guns are used to paint them all. Spray guns allow amateur as well as professional painters to paint large surfaces faster and more efficiently. That said, not all paint is spray gun-friendly. You don’t want your spray gun to get blocked up, jam, or not spray efficiently as a result of you loading it with incompatible paint.

That’s why you’ll want to take care to find paint that matches not just your paint job, but your spray gun.

With that in mind, let’s take a look at some of the best paint for a spray gun and see which options best suit which paint jobs.

Top 10 Best Paint for a Spray Gun

Best Paint for a Spray Gun Reviews

As stated, when it comes to finding the best paint for a spray gun reviews must focus on the different pros and cons which distinguish each paint in terms of overall performance. These reviews do just that. With that in mind, let’s take a look at some of the finest paint for spray guns and see what makes them rank among the best.

#1. Rust-Oleum Painters Touch

Rust-Oleum is one of the most established names among painters, and so it should come as no surprise that it ranks among the best paint choices for use with spray guns.

Pros and Cons

One of the most significant pros of this paint is the fact that it can be used both indoors as well as outdoors. It is a low-odor paint, which means that you don’t have to worry about excessive fumes causing safety hazards and excessive odor problems with respect to indoor use. Even so, it remains hardy enough for outdoor use as well.

It spreads well on a variety of surfaces, including wood, metal, plaster, and ceramic surfaces, and boasts a flat finish which can cover up imperfections nicely. It doesn’t chip too easily, and it takes about half an hour to dry after application.

On the con side, you do want to make sure to mix this paint well, or your results will be significantly diminished, especially when using it in a spray gun. However, this is something you should already be doing anyway. In addition, you’ll want to pay close attention to the paint color when applying it, as while there are more than a dozen color variations of this paint available, some of the darker colors can look similar to one another.

#2. Majic Paint 5 Gallon

This exterior paint comes in three different colors, brown, white, and black. It is primarily intended for painting barns and fences, though it is by no means limited to just those surfaces. However, it should be noted that it is not intended for use on roofs or floors.

The paint can cover as much as 250 square feet per gallon. It can be applied to wood, brick, and metal surfaces.

Pros and Cons

On the positive side, this paint is well-designed to withstand the elements. It is a hardy latex paint which boasts both UV and fade resistant qualities. Dry time is typically fast at around 30 minutes.

That said, while it may be sturdy, some customers have reported the paint being too thin or watery for their needs. Others have claimed that it dries in a different hue than expected. While the latter is not an uncommon complaint, as paint will often dry with slightly different colors depending on conditions, you should remain mindful of this and check your paint while it dries to make sure you’re getting the color consistency you need.

All in all, as long as you are mindful of its intended uses, this can be a quality exterior paint choice.

#3. Valspar 5 Gallon Line Paint

One of the most important things to consider when choosing an exterior paint is making sure that it can be applied to different surfaces. Consider all the different surfaces which make up your exterior décor. You want the paint covering them all to be consistent.

Pros and Cons

There are several upsides to recommend this option, including the fact that it boasts fast-drying latex. This is a great material for use on athletic fields. Indeed, this paint can be used not just on clay and concrete surfaces, but grass and synthetic turf as well. If you maintain an athletic field and need to put down markings for baseball, football, soccer, lacrosse, or similar sports, this would be a good paint option for doing so.

If there is any drawback to this paint, it’s that it is only intended for exterior use and specializes primarily in marking athletic fields. It is also worth mentioning that other Valspar paint options have been criticized for their strong and potentially unpleasant odor, though the former does not yet appear to be a problem with their Line Paint. Other Valspar paint complaints have included paint peeling after a few years, though you’d want to repaint foul lines, hash marks, and other aspects of an athletic field regularly anyway.

#4. Valspar Porch and Floor

Here we have another offering from Valspar, with this one specializing in handling porches and floors. It is important to note that you do want to heed the specialties indicated by each drum of paint. This unit is meant to be used on interiors and is more superior in that respect than the Line Paint, which is meant for use on fields and should be employed there rather than this option.

Pros and Cons

To take it on its own merits, this offering from Valspar has several good points.

For one thing, due to the fact it loads easily and covers well, it is certainly one choice for the best paint for a spray gun. You can apply it to porches and floors and expect it to last a long time. It works on both wood as well as primed metal. What’s more, it is practically odorless, so you don’t need to worry about it producing excessive fumes or leading to odiferous interior décor.

While it isn’t a negative per se, it should be noted that this is a flat, practically sheenless paint, so you’ll want to make sure that’s what you want before applying it. In addition, some have taken issue with the grey paint having a bluish tint.

#5. True Value 5 Gallon Interior Flat White

This is another hardy paint which can be used to cover a wide range of surfaces. It is designed for use in your interior, and can handle many different types of surfaces.

Pros and Cons

One of the biggest upsides of this paint is the fact that it dries quite quickly. That’s a big plus for those looking to use a spray gun to paint their interior and get the job done in a quick and timely fashion. In addition, it covers surfaces quite neatly and can be cleaned with ease once it has dried. All in all, this is a good paint to use on interior painting jobs.

That said, while this isn’t a con per se, it does bear reiterating that you should only use this paint on interiors. For as hardy as it is, it is not designed for exterior use.

If there is anything negative to say about this paint, it’s the fact that it’s on the thicker side. While that’s hardly bad on its own and, indeed, is often what you’re looking for in a latex paint, it does mean that you’ll need to thin it considerably before you can use it with a spray gun.

#6. Kilz

This is another paint which is designed for use on porches and floors. Kilz has more than 40 years’ worth of experience in the industry, and was named the Paint Brand of the Year in the Harris Poll in 2015.

Pros and Cons

There’s a lot to be said about the durability of this paint. It is highly resistant to scuffing, cracking, and peeling. It does not peel easily, and boasts a mildew-resistant film. That latter part is especially important, protecting your paint job from the unsightly odious consequences of the mold and mildew which might otherwise pop up in moist conditions.

All of these factors combine to create a paint that has tremendous staying power. It has a low-lustre enamel surface, and can be applied to both wood and masonry surfaces.

This paint does take slightly longer than others to dry at an hour. In addition, some have complained that the amount of paint they used the first time did not cover the surface area as well as they hoped, resulting in them needing to apply even more paint. While that may be down to individual error, you do want to be mindful of how much paint you’ll actually need to apply to get the job done.

#7. Valspar Latex Enamel Paint

Where the previous Valspar options on this list were more particular in terms of their intended use, this paint is far more general. It can be used in both interior as well as exterior settings in jobs which require latex enamel paint.

Pros and Cons

That versatility is already a big point in this paint’s favor. While there are some interior and exterior painting jobs that require their own paint, it’s also nice to have a paint that can be used interchangeably between the two settings without much fuss.

In addition, this paint boasts a lovely glossy finish, and spreads well on both wood and metal. In addition, it is more durable than you might expect from a combo interior/exterior paint with a glossy finish. It comes in 12 different colors, and can be cleaned up quite easily, requiring only soap and water to clean up spills, splatters, and old unwanted paint.

If there is anything negative to say about this paint, it’s that it comes in a smaller can than other options on this list. That said, when it comes to home and industrial painting, it’s about the quality, not the quantity. Even if it requires an extra can or two to get the job done, the paint itself is of good quality.

#8. Old Village

This is easily the most versatile satin paint option on the list. It features a water base, and can cover areas quite well.

Pros and Cons

The first thing that immediately leaps out about this paint is the fact that it comes in over two dozen colors. If you are looking for a rainbow of colors to get your next big painting job done, there’s a good chance Old Village has you covered. This paint boasts a full satin finish, and the style of paint can reproduce historic finishes well, so if you’re looking to touch up a decades-old paint job, this might be a good choice.

In addition, this paint dries quickly. That’s good given the fact that you’ll primarily be using this in interior painting jobs.

On the flip side, this is another paint option that comes in smaller sizes. This offering from Old Village comes in paint cans which are only one pint in size. That means that you will have to buy more paint to cover the same area which can be treated by larger paint cans. That said, as stated above, you probably won’t mind as much with paint that is of high quality, and that’s certainly the case with this offering from Old Village.

#9. Kilz Masonry Paint

This offering from Kilz, as the name would imply, is intended for use on masonry surfaces. Of all the surfaces covered here, masonry requires some of the most care. Ceramics and similar masonry surfaces require a special touch given how delicate they can be, and depending on the aesthetics of the ceramic surface, you may want a glossier or duller sheen.

Pros and Cons

To that end, one of the best things about this paint is the fact that it can be applied to many different surfaces while retaining a natural look. In addition to masonry, it spreads well on drywall and stucco as well. Moreover, the paint is self-priming, which makes it far more convenient to apply than many alternatives. It is also available in a wide range of colors.

If there is a downside to this paint, it’s that it is another one on the thicker side and so will need to be watered down a bit before you can use it in your spray gun. However, as stated with other thick options, this is typically a “good” problem to have. This paint is of high-quality, so just water it down as needed, and you should be good to go.

Best Paint for a Spray Gun – Buyer’s Guide / FAQ / Tips and Advice

Now that we’ve reviewed some of the best paint for spray guns on the market, let’s take a look at the subject on a broader scale. This buyer’s guide can offer a few tips and tricks as well as answer some of the most frequently asked questions about painting with spray guns.

What Paint Works Best on Wood?

One of the most important questions to solve for anyone looking to do a bit of DIY or commercial painting is what paint works best on wood. The answer there is more varied than you might expect.

On the one hand, traditional latex is the paint of choice for handling wooden surfaces in interior painting. Another paint of choice here is alkyd. It is heavier than vinyl and can, thus, give off a hardier appearance when applied to wooden surfaces such as trim, or used on its own for painting ceilings.

You’re going to want to make sure that you’re getting a type of traditional latex paint that matches well with the type of job you’re looking to perform. In this case, you need to make sure that you’re getting latex paint that won’t chip easily and matches your overall interior décor.

Given our topic, a natural follow-up is which spray paint is best for wood, and the answer there involves a veritable “wish list” of what you’d want in this situation, including:

Paint that dries quickly

Paint that loads and sprays easily

Paint that’s pre-primed

Paint that has a glossy finish

In this respect, high gloss and semi-gloss alkyd paints can be a great choice.

What Is the Best Exterior Paint Primer?

When it comes to reviewing exterior paint primer, we first have to ask what type of paint we’re priming in the first place. Latex and acrylic paint are great for exterior painting jobs. Acrylic paint in particular provides good protection against fluctuating temperatures and weather conditions.

What is the best exterior paint primer? One which is likewise able to stand up to the elements.

If you are indeed using latex or acrylic paint, as recommended above for exterior painting jobs, you are going to want to make use of alkyd as primer and latex for the topcoat, especially when repainting.

In addition, you’ll want to make sure to account for different types of surfaces. After all, while it’s easy to say that you’re “just” looking to paint a wooden exterior, there are plenty of differences between different types of wood. For example, cedar and redwood often work best with oil-based primers that can protect the surface from tannin staining.

In addition to protection, you’ll also want to make sure that whatever exterior paint primer you choose meshes well with your paint color of choice.

All in all, you’ll want to do your research on both the wood and the type of color and see which alkyd, oil-based, or other primer pairs best with them.

Best Paint and Primer Combo

Anyone who has ever had to use primer knows what a tedious enterprise it can be to apply it before and even during every painting job. Finding a paint and primer combo that includes both in an “all in one” package can help cut down on your paint time. While that might not necessarily work with every painting job, it can still be worthwhile in certain conditions.

With that in mind, what should you look for in the best paint and primer combo?

For one thing, you’ll want to check your expectations. A “paint and primer combo” in an “all in one” package tends to mean paints which are formulated with a concentration of solids that “primes” in real-time while you paint. You’ll also want to make sure that you are choosing a combo that can handle bare wood or surfaces where the paint alone won’t be able to completely cover the wood from bleeding through the paint job. In addition, durability is vital, as you won’t want to re-prime surfaces painted and primed with these combos.

For a “true” paint and primer combo, you’ll need to approach things on a case by case basis depending on the surface being primed and the paint in question. For example, latex paints pair well with alkyd primer when painting exterior services. In short, when painting a surface, to do it best quality paint colors and matching primer are needed.

Best Spray Paint Gun for Walls

Let’s pivot from paint to spray paint guns.

One of the most important things to consider when choosing the best spray paint gun for walls is whether you are using a professional or commercial paint spray gun. Closely connected to that question is whether you are using an electric, gas-powered, or high-pressure air paint spray gun. Professionals tend to opt for the high-pressured options, while commercial paint sprayers typically make use of one of the other two.

In addition, you’ll want to determine how much of a priority speed is in the completion of the project. As a general rule, the greater the amount of horsepower listed on the spray gun, the faster it can get the job done. That being said, if you get something with too much horsepower, it can feel less like you’re handling a paint spray gun and more like a bazooka and leave you with a mess. You, thus, need to strike a balance between horsepower and the amount of force you need and can handle.

In addition, you’ll want to take into consideration the size of your project. Larger projects such as painting several walls typically require a broader spray pattern and paint guns that can spray their paint over a larger area at once. By contrast, spray painting furniture and smaller targets requires spray guns that place more emphasis on accuracy than area covered.

Best Paint Sprayer for Chalk Paint

What about if you are looking for a paint sprayer that can handle chalk paint?

In searching for the best paint sprayer for chalk paint, there are a few things you’ll want to consider, not the least of which being pattern adjustment. Given the type of surfaces which are typically covered with chalk paint, you’ll want to make sure that whatever sprayer you are getting can easily swap between different patterns so as to allow you to cover the areas in question more efficiently.

In addition, you’ll want to make sure that you choose a paint sprayer that allows you to achieve a nice, smooth finish with each paint job.

Then there’s the matter of cleaning your paint sprayer. No one wants to have to deal with extensive delays due to tough stains or clogs resulting from a heavy, hard to remove buildup of paint inside or on the exterior of the unit. You, thus, want to prioritize paint sprayers which can be cleaned easily.

Finally, you’ll want to consider the capacity and wattage of the spray gun. A spray gun with wattage in the low to mid-hundreds will be weaker and so might have a harder time handling larger surfaces than those with higher wattages. The same holds true of paint sprayers with a smaller capacity.

Best Spray Gun for Metallic Paint

Let’s switch from talking about painting wooden surfaces to metallic ones. Determining the best spray gun for metallic paint means finding something that can control the spray while spreading it with enough power to completely cover the surface. You’ll also want to be sure what type of metal you are spraying over. Spray guns for metallic paint are especially prominent in the auto detailing industry, for example, so if that’s your intended usage of these types of spray guns, you’ll want one that is specifically tailored to handle the kind of metals which are commonly used in autos.

Two of the most common types of spray guns for jobs such as these are “high volume low pressure” and “low volume low pressure” paint guns. The primary difference between HVLPs and LVLPs, as you might expect, are the amount of volume they have. The former are more common, boast large air compressors, and are often better for larger jobs. The latter have smaller air compressors and are often better as both a budget option as well as for smaller projects.

Finally, you’ll want to consider the feed, which typically breaks down into gravity versus conventional categories. The former often uses less air pressure and can be more efficient while the latter can carry more paint, but are often on the bulkier side.

Best Spray on Gun Finish

One of the most important questions to contextualize this category is the surface and type of paint to which you are applying finish in the first place. Wood finishing is going to require a different approach from metal finishing, after all.

To take the former first, HVLPs are quite common. You’ll want to find a spray gun that can handle both sealant as well as traditional finishing. When it comes to finding the best spray on gun finish for wooden surfaces, you’ll want to find a spray gun that can accept paints typically used in painting wood, such as latex, as well as varnishes.

When finding a spray gun to handle metal, you’ll want to find one that is able to spray rust-resistant paints, given how important that is for safeguarding the integrity of the surface in question. If you are detailing autos, you’ll want to make sure you get a nozzle that not only allows for a fine finishing, but can likewise be adjusted as to allow you to do some detailing.

In both cases, you’ll once more want to pay attention to both the wattage and capacity.

Overall, you’ll want to determine what kind of paint finish you are looking to apply, and then pick your spray gun accordingly.

Best Paint for Trim: Oil or Latex?

This is one of the classic conundrums faced by amateur as well as professional painters – which is the best paint for trim, oil or latex?

Oil-based paints can provide a smooth finish with a nice sheen. What’s more, once they dry, they can block the areas to which they have been applied, which in turn can improve your insulation. In addition, they are thicker, which can help you fill scratches and make for a longer-lasting paint job. On the other hand, oil-based paint can take a long time to dry.

That is one of the biggest perks of latex paint – that it dries far faster than oil-based options. This can be great for jobs in which time is of the essence. That said, latex has at least one major drawback as a trim, that being that it’s a water-based paint and, thus, a bad idea for painting on metal surfaces, as water mixed with metal is a fast track to rust.

The answer of which is better, oil or latex paint, thus boils down to a simple latter of judging priorities. If you care more about speed, then latex is the way to go. If you are painting on metal surfaces or care more about adding insulation, you’ll want to consider oil-based paints instead.

Best Paint Sprayer for Metal

Once again, this is a question which can arguably put the cart before the horse or, in this case, the sprayer before the paint. You first need to consult the above sections and other resources if necessary to find a paint that can go well with metal surfaces. Once you find your paint of choice, you’ll then have a better idea as to what type of paint sprayer you’ll need.

The single most important quality to look for when searching for the best paint sprayer for metal, therefore, is compatibility with most leading metal-friendly paints. That means that you’ll want to find a paint sprayer that is extremely versatile.

In addition, as stated above, painting with metal typically involves adjusting the nozzle so as to allow for nuance and detailing or broader bursts of paint. As such, finding paint sprayers that adjust easily is key. You’ll also want to keep an eye on cord length, the more the better.

In addition, you’ll want to make sure to get a paint sprayer that has enough wattage for the job, which should be in the mid-400s and above.

Finally, some paint sprayers can be used directly with the can of paint, which is a huge timesaver and a definite plus if managed correctly.

Best Paint Sprayer for Exterior Brick

While painting a brick exterior may sound like a wonderful idea from a home décor standpoint, it can be quite tricky to pull off successfully. For one thing, brick as a material is more porous than, say, metal, and can, thus, absorb a lot more paint. As such, before you even think about spray painting your brick exterior, you’ll want to do a fairly extensive amount of cleaning and priming beforehand.

In terms of the actual qualities you’ll want when searching for the best paint sprayer for exterior brick, you’ll want to be sure to choose paint sprayers which operate at the upper end of the power spectrum. It is going to take some force to successfully apply the paint to the brick in a manner that makes it stick. You’ll, thus, need a powerful paint sprayer that is up to the task, and can treat a wide range at once. In addition, you’ll probably want a paint sprayer with a long cord, since you’ll likely be going up and down a large expanse to make sure that the whole space is painted.

That said, unless you’re going for a clean red brick look, you don’t necessarily need to apply paint evenly. Indeed, a few artful splatters here and there, even when applied by a spray gun, can give a brick exterior some character.

How to Thin Oil-Based Paint for a Spray Gun

As stated in some of the paint reviews, sometimes you have paint that is excellent in every respect except for the fact that it’s too thick to be used with a spray gun. When this is the case, you have two options – choose different paint, or thin the paint you already have to make it more spray gun-friendly. The latter option can sometimes be more affordable, and can be the better option if you’re convinced that everything else about the paint makes it the perfect choice for the job.

If you choose the latter route, consult this guide on how to thin oil-based paint for a spray gun:

  1. Pour the paint through a strainer and allow it to filter into a clean container
  2. Add one part turpentine for every three parts paint
  3. Stir the paint until you start to see thinning occurring
  4. Run the paint through a funnel to test its thinness; if it is still thick, repeat steps 2 and 3

As that basic guide demonstrates, you’ll want to check your oil-based paint throughout the thinning process. You don’t want it to thin more than is necessary to get it to work with your spray gun.

Mixing Paint for an HVLP Spray Gun

This can be useful and in many cases necessary when trying to use latex-based paints with a spray gun.

If you have paint on hand that is too thick for your HVLP, you’ll have to mix it first following this guide for mixing paint for an HVLP spray gun:

  1. First, go ahead and try thinning the paint with water. This may not always work, but it is by far the simplest method.
  2. If that doesn’t work, add some latex paint conditioner to decrease the amount of viscosity. These paint conditioners have the benefit of being designed for this job, and so offer more precision than merely mixing in some water.
  3. Use a paint strainer to filter the paint. Ideally, you want to get your paint thin enough to fit through the 1.4 mm nozzle size which many paint sprayers employ.
  4. Consider the length of the hose you are using. If the hose is short, there will be less time for heat to disperse and decrease before it reaches the paint. If this is a problem for you, try using hoses that are on the longer side.

This method can help you strain and mix paint for HVLP sprayers with ease.

How to Thin Water-Based Paint for a Spray Gun

Let’s say you are not using an oil-based paint with your spray gun, but rather a water-based option such as latex. If that’s the case, you’ll want to consult this guideline for how to thin water-based paint for a spray gun:

  1. Take the latex or other water-based paint and pour it into the bucket
  2. Add water. How much you add will depend on the amount of paint you need to have thinned. As a general rule, ½ a cup of water should be enough for every gallon of paint.
  3. Take a stick or other clean tool and mix the paint vigorously, though not so much as to totally spoil the consistency or cause excessive splattering.
  4. Pour the paint through a funnel to check its thickness. You’ll know you have thinned the paint sufficiently when it is able to flow through the funnel quickly and easily.

In addition, you’ll want to keep in mind that thinning the paint will change some fundamental facts about it, including the time it takes to dry and, in some cases, its color. For example, the paint may take longer to dry, be a lighter shade, and may require additional coats to cover the same area a single coat could cover at regular thickness.

What Kind of Paint for a Spray Gun Is Best?

We’ve looked at both oil as well as latex paints, and examined their pros and cons. With that in mind, it’s time to get to the heart of an important question – what kind of paint for a spray gun is best?

Consider the case for each.

Oil paints do dry faster, which is nice for traditional painting methods. That said, being oil-based means they are thicker, and, thus, require the kind of thinning process described above.

By contrast, latex-based paints do not dry as quickly. That said, being water-based means that they are thinner, and so often require thinning processes less frequently and to a lesser extent.

That distinction sets up the basic dichotomy of priorities that will determine which option is better for you. If you do not mind thinning the paint first, oil-based paints can be a good choice. However, if you find thinning paint tedious or too costly, you would be better served by latex and other water-based paints. If you do need to thin them, it can be easier to do so than with oil-based paints.

Water-based paints are naturally thinner, pose less of a risk of clogging the nozzle on your paint sprayer, and are, thus, the better choice in terms of compatibility and convenience.

Spraying Acrylic House Paint

As mentioned above, acrylic paint can be good for exterior painting jobs where paints which are durable in the face of heat and weather conditions are necessary. Moreover, acrylic paint is often used around the home for more aesthetically-inclined paint jobs. Whichever avenue you are choosing to pursue, you’ll want to be sure to follow these basic guidelines for spraying acrylic house paint:

First make sure that the paint is thin enough to fit through the nozzle with ease. If it isn’t, make use of the paint thinning measures mentioned above.

Acrylic paint pairs best with HVPLs.

Be sure that the air pressure for the HVPL is at the level you need. You don’t want it to be too low to spray the paint effectively, but you also want to avoid higher setting which can cause the paint to burst and splatter out of control.

Be sure to apply primer before painting.

Be sure that you have a long enough hose to accommodate your spraying job.

Be sure to clean the nozzle each time after using acrylic paint.

Understand ahead of time what the dry time will be like and plan accordingly.

Above all, make sure that you understand the properties of acrylic paint and ensure beforehand that it is the best type of paint for the job.

Final Verdict

Part of what makes it difficult to select any one “best spray paint for use with spray guns” is the fact that every spray paint here has distinct pros and cons. Some are better suited to exterior use, and others are designed for interiors. Which is “best” for you will, thus, depend on what part of your home you are painting and what type of surface you are painting in particular.

If you are looking for one paint to get the job done, the True Value lives up to its name. It gives you the best all-around value by providing solid coverage and sturdy paint for a variety of different surfaces. The only real downside is that you’ll likely have to thin it to use it with a spray gun. That said, given the quality of the paint, that is certainly worthwhile in exchange for the quality of coverage this paint provides for interior and exterior paint jobs.

If, on the other hand, you are willing to mix and match according to the task, the Valspar options here stand as solid choices. The Line Paint, Porch and Floor, and Latex Enamel Paints all do a great job of treating the surfaces they are designed to cover.

You’ll also want to be mindful of the purpose behind your painting. If you are looking to paint floors and have them look like new, for example, both the Valspar Floor and Porch options as well as the True Value are excellent choices. If, on the other hand, you are trying to replicate an older aesthetic or want to evoke the sharp sense of color satin paint provides, the Old Village can be a good choice.

While the True Value option is indeed the best all-around option, your ultimate choice will depend greatly on what you are looking to achieve.

Thankfully, whatever your painting aims, these paints are more than up to the task.

0
Shares
Krystal Morrison
 

I create this blog to share my daily tips about home improvement, children, pets, food, health, and ways to be frugal while maintaining a natural lifestyle. Interested to be a Guest Blogger on my website? Please email me at: Info@FamilyHW.com

Click Here to Leave a Comment Below 0 comments