Common DIY Plumbing Mistakes: Why You Should Hire a Professional

As tempting as it is to attempt to try to fix things as a DIY project to save a bit of money, there are many common DIY plumbing mistakes that can result in you spending a lot more money in the long run.

Below, we will take a look at some of the most common DIY plumbing mistakes that homeowners can make and why it’s important to hire a professional plumber.

Failing to Obtain the Correct Tools For The Job

Before Starting any DIY project, it’s important that you ensure that you have gathered all of the relevant plumbing supplies for the job so that you have them on hand when you need them. One common problem that some DIYers make is assuming that they can use tools that they already have around the house.

Unfortunately, this can cause some big problems as they may end up damaging hardware or breaking pipes. This can then cause even more costly problems. Hiring a professional for the work will prevent this from being an issue as a professional plumber will always have the right tools for the job.

Overtightening Connections

One of the most common plumbing mistakes that DIYers make is overtightening connections. If you overtighten toilet bolts, supply tubes, and pipe fittings, you can easily break or crack the fittings. What’s worse is that the crack may not be visible immediately. In some cases overtightened fittings may break days, weeks, or months later, causing expensive flooding issues and potentially destroying your pipework.

With this in mind, it’s important to be gentle and remain vigilant when tightening connections. A professional plumber has a lot of experience in tightening connections and will know just how much to tighten things by to ensure there are no problems.

The Job Is Started Without Extra Parts On Hand

In some cases, it’s important to have additional spare parts on hand, just in case. Many DIYers fail to do this. For example, if you’ve determined that a faulty washer or cartridge is the issue, you may head right into the job with just these parts for replacing. While this makes sense, it’s important to remember that if one part isn’t working well, there is a good chance that some other parts of the faucet may need to be replaced as well.

It’s a good idea to also have some spare gaskets, stem seals, and O-rings on hand when completing this type of work, just in case. This is a common mistake that DIYers often make and it means that they have to run out to the shop in the middle of the repair or replacement job.

Mixing Up Tees, Wyes, and Elbow Joints

This is possibly one of the worst mistakes that DIY plumbers can make. Many homeowners mix these fittings up to create their own joints and fittings instead of sticking to the golden rules of plumbing. When fixing certain plumbing issues, they require certain unique fixes. Each of these fittings require different situations for them to be applied properly. You must know which plumbing issues require which solution and know when each fitting is required.

For example, using a 90 degree vent elbow to change the direction of your drain line can result in clogs in the pipework. Unless you’re a fan of regularly unclogging your drains, it’s best to leave this type of work to the professionals.

Forgetting to Turn Off The Water Supply

If you try to tackle any plumbing jobs without turning off your water supply, you’re likely in for trouble. You could be faced with a big flood if you don’t act fast enough. This is one of the most common DIY plumbing mistakes and costs homeowners thousands of pounds of damage every year.

If you’re planning on doing any plumbing DIY work, make sure you turn the water supply off before doing anything else. Alternatively, hire a professional to complete the work for you. That way, you don’t need to worry about a thing.

Using Drain Cleaners Instead of Considering Alternatives

Most people’s first thought when it comes to blocked drains is to rush out to the shop and get a chemical drain cleaner. While this can be helpful in some cases, it never really fixes the issue fully. Liquid drain cleaners can often cause more issues down the line. These liquids are corrosive in nature and can damage your pipes, resulting in a leak. Drain cleaning solutions can also damage rubber gaskets in the drain line.

It’s much better to use a drain snake cleaning tool to remove the blockage. Alternatively, hire a professional plumber who will be able to locate and remove the blockage in a safe way without damaging your drainage system.

How to Find a Good Plumber

In most cases, it’s best to leave plumbing work to the professionals. Even just a small mistake can end up costing you a lot more money in the long run.

To find a good, reliable local plumber, consider searching for “plumber near me” and taking a look at some reviews of local plumbers. A good plumber should be able to provide testimonials as well as evidence of previous work.

It’s also worth asking around to see if any of your friends or family members have recently used a good plumber who they would be happy to recommend to you.

Krystal Morrison

I create this blog to share my daily tips about home improvement, children, pets, food, health, and ways to be frugal while maintaining a natural lifestyle. Interested to be a Guest Blogger on my website? Please email me at: [email protected]

Click Here to Leave a Comment Below 0 comments

There are affiliate links in this post. At no cost to you, I get commissions for purchases made through links in this post.