What Type of Sander Is Used For Sand Wood Floors?

Disclaimer: There are affiliate links in this post. At no cost to you, I get commissions for purchases made through links in this post.

Wood floor sanders and drum sanders are well equipped for their purpose because they are significantly
more substantial and more powerful than manual sanding machines. They take a certain amount of care
and skill to function correctly, however and can do harm in the wrong hands or if used for the wrong
purpose. The sanders of the drum and floor are very expensive and reach thousands of dollars, and have
only one use: hard sand wood. Residential centers with rental components and rental yards usually have
drum sanders.

There are four basic types of floor sander, and the most appropriate to use depends on what kind of
flooring is sanded and its condition.

Soil Types Sanders

The floor drum sander is the most aggressive of the all other machines, capable of removing 1/16 inch of
wood and finishing in a single pass, but does not reach the corners or along the edges; that's the job of
the edger, a high strength laminated disc sander used with it. The orbital floor sander is the third type of
floor sander. It is similar to a hand sander pad, but much more significant and weighted. Each machine
has a different action and leaves a different set of sanding scratches on the floor.

Plank Floors

Most wooden floors are laid on parallel planks. If the boards are not covered, in the most efficient way
to the sand, it is through the use of a drum sander and edger. The drum sander leaves scratch marks
parallel to the direction of movement of the machine, and the painters usually run along the direction of
the floor. The edger, on the other hand, leaves marks perpendicular to its movement, but since it is used
only at the edges, the marks do not usually stand out. The usual procedure is to use both machines with
successively finer grits of sandpaper to progressively soften the soil.

Parquet and floors with drawings

Floors that have wood grain in the running in different directions, such as parquet or inlaid floors, can be
damaged if sanded with a drum sander and edger because it is impossible to avoid leaving grain cross
sanding marks in some of the tables. The solution is to sand them with an orbital floor sander. Like a
sander on the hand pad, it leaves circular sanding marks, and because it does not cut as deeply as a
drum sander or edger, the sand marks are easier with finer grains of paper. An orbital sander reaches
the edges of a floor and at the corners, but it works more slowly than the other machines.

Engineering floors

Engineering plants present a problem for the painter because the top layer, which contains the wood
pattern, can be as little as 3/32 of an inch thick. A drum sander can quickly carry through a thin coat of
varnish, so the safest option is to engineer sand floors with an orbital sander. Before sanding a floor with
any sander, however, it is advisable to examine a cross section of the floor in a door to measure the
thickness of the sheet. If the floor has been previously sanded, it may not be able to be sanded again
without suffering irreparable damage.

Drum Sanders:

The drum sander is an entirely different tool, since a loop of sandpaper moves continuously around the
drum, tearing the wood as much as you want. With an orbital sander, it is difficult to make mistakes,
since it is difficult to remove too much wood. On the contrary, a floor sander with a drum is strong
enough so that it can go in two very different directions: ruin your floor creating grooves that can never
be repaired or sanding significant imperfections so that your level looks spectacular. Drum sanders come
in various designs, and they are the best drum sanders for finishing sanding and working when with
large ply boards.

How to Choose Sandpaper for Sanding Wood?

The first thing you should know when preparing to sand a project are the type of sand papers or sanding
discs needed to do the job. The sandpaper or abrasive disc indicated should be selected according to the
material to be sanded. Always starting with the use of the thickest sand paper to the finest, ever
according to the objective of sanding. If you’re unable to that you can take help from woodworking
toolkit to build your dream house. If you’re searching for the right tool for the job, we are here to help

Krystal Morrison

I create this blog to share my daily tips about home improvement, children, pets, food, health, and ways to be frugal while maintaining a natural lifestyle. Interested to be a Guest Blogger on my website? Please email me at: [email protected]

Click Here to Leave a Comment Below 1 comments